MidNite Solar's voltage based battery capacity meter has auto-sensing for 12, 24, 36 and 48 volt battery banks. This meter also has LED's that correspond to battery voltage with an accuracy of +/- 1%. These LED indicators show if batteries have received a full charge in various durations; recently, longer than 1 week, or over 2 weeks.
Sulfation can be a problem for battery banks. The MidNite Battery Capacity Meter indicates a lack of sufficient charging that can lead to sulfation. There are settings for wet lead acid, GEL or AGM battery bank chemistries.
The MidNite Solar Battery Capacity Meter is voltage based, requires no shunt, and needs no calibration.
There are 10 battery state of charge LED's and three battery care LED's.
State of Charge is displayed by the arched 10 LED percentage meter.
The three battery care LED's on the left side will indicate the following conditions: